Silicone bracelet is the most popular fashion jewelry in Europe and America. It is a kind of color silicone jewelry that is more avant-garde and popular. Among them, no big-name stars use it as their decorations, making you cool and full of flavor! As for the production process of silicone bracelet, it is estimated that not many people have fully understood it. Pinshang Silicone explains the whole production process of silicone bracelet.
Design of artwork
The design of artwork is generally based on the size of the sample artwork provided by the customer. Graphic drawing software, such as CDR or AI software, is generally used to make the artwork. If the customer cannot provide the sample artwork, we can cooperate with the customer to complete the design and production of the artwork free of charge according to the customer's requirements.
The mold opening is that the mold master creates an offset plate according to the designed artwork, then uses the offset plate to carve a copper worker, and finally carves a steel mold with the copper worker. Some hand ring craft moulds have a relatively high technical content and take a relatively long time to produce. Generally, the mold opening period is calculated by five days. With the mould, the production will be quick.
According to the color number on the international Pantone color card specified by the customer, our color mixing ratio is aligned and the color difference is minimal.
The materials required for each bracelet are weighed by an electronic scale. Generally, the bracelet weighs about 5.5 grams.
Upper die production
After the mould is finished, it is produced on the machine. After the mold is installed, the machine needs to be warmed up. A 9-mold machine produces about 15000 pieces per day.
After the bracelet is produced, the product shall be inspected and checked, mainly to see if it meets the specifications. If it does not meet the specifications, it will be discarded.
Each bracelet is produced with a residual edge. After the quality inspection department passes the inspection, the product is sent to the post-process department for trimming. (Average trimming quantity per person per day is about 3,000 pieces).
Finished product inspection
After the edge is repaired, the finished product is obtained. It is also necessary to send the finished products back to the quality inspection department to check the trimming quality. If there are any unqualified products, they will be scrapped.
After the repaired products pass the inspection, they shall be packaged according to the customer's requirements. Packaging is divided into PP bag independent packaging and naked packaging. Both are 100 pieces in a pack. Usually 20 packs per carton (2,000 pieces) are standard export containers. Packing is generally required by customers.
Inspection before sealing
After the packaging is completed, the quality inspection department will check the quantity. if there is no problem, seal the case and send it to the warehouse for delivery.
Copyright © 2005-2019 24hourwristbands.ca