What is the basis for judging the quality of the silicone bracelet?

For customers who have bought a lot of silicone bracelet ,how to judge the quality of a rubber band is a simple matter .However they don’t know how to judge the quality of a silicone band for the guests who bought it first time .It’s not a very difficult thing,next we will tell you how to judge the quality of a hand ring in detail.

First point,is the color of silicone bracelet whether match the customer’s requirements and pantone card.All the silicone band factory are use the pantone color to produce the silicone wristband ,although the guests provide us the other colors ,such as cmyk color or rgb color,we will eventually chage it to pantone color .If you don’t know which pantone color do you want ,you can refer to the electronic version of the Pantone card ,you can absolutely find the pantone color on the pantone card.If the color of the silicone band you receive is not match the pantone card and your requirements ,it means the quality of the silicone band is unqualified.

After talking about the color of the silicone band ,then we will talk to you about the edge of the silicone bracelet whether smooth.The edge of a fine wristband should be smooth and without a notch,otherwise the quality of it is unqualitied.But you don’t have to worry about it ,we all use machines to trim the edges of band and we will check the quality of band before ship it out .We can ensure the quality of silicone bracelet you receive is qualified.

Third point ,is about the logo .If you order the silicone wristband with logo embossed or debossed ,it can be kept permanently .However if you choose to make the logo printed ,because of the surface of the hand ring is often rubbed with other objects,the logo will fade away.So a wristband with good printed although can not avoid logo disappear gradually but it can keep the logo with longer time.How to judge the quality of the logo printing of a hand ring ?It include the logo printed whether clear and whether logo is stained with other colors.If the answer of these questions is yes,so the quality of printing is qualified.

The last point is whether the surface of silicone band is clean.Because silicone band can produce static electricity, it is easy to absorb dust and impurity. Therefore, in order to ensure the cleanliness of products, all products must be washed and dried before packing.

If the answer to the above four points is all yes,congratulations on you,the silicone bracelet you receive is perfect,you can use it at ease.If you choose ordering silicone band from us ,we can guarantee that the best quality hand rings are provided to you,because this is the business philosophy that we have been insisting on since the establishment of our company,and we’ll stick to it all the time.

How to customize a fine rubber bracelet you want?

As time goes on,the rubber bracelet jion to our life gradually,a lot of people like to wear it,this is a trend.However many people don’t know how to customize a fine rubber bracelet they want on the website.Now we are honored to introduce you the detailed steps to order the silicone wristband .

If you want to order the silicone bracelet you want ,the first step is choose the band style ,about it we have debossed ,embossed,colorfilled,printed and so on .Different styles of silicone bracelet have different requirements for logo, and the effects of different styles of silicone bracelet are different.For example ,if you order the embossed or debossed wristband ,the thickness of the line must be 0.3mm at least,otherwise it can’t make the mold out.Of course if you make the logo printed ,the requirements for the logo lines are not so high ,just need the logo lines have 0.1 mm is enough.After talking about the requirements of the style to logo, let’s talk about the difference in the effect of the different styles of the silicone band .Make the logo printed can let it have several colors but because logo is placed on the surface of the , due to the constant friction of logo, there will be varying degrees of wear and tear.If you want logo to never disappear ,you can choose debossed or embossed,however this product process can only let the logo have the same color as the band .Each style has its own advantages and disadvantages

After choosing the style of rubber bracelet ,the next step is selecting the band size you want .About the band size ,for the band length we have 202mm (8inches) ,180mm (7inches) and 150mm (6inches) ;For the band width we have 6mm (1/4 inch),12mm (1/2inch),19mm (3/4inch) and 25mm (1inch);And for the band thickness we have 2mm.To make a long story short,we have many sizes for you fo choose,even if you don’t find the size you need ,you also can customize the size you want .

The last step is choose the band color,you have several options,such as solid,segmented,swirled and glowing.Each can give you a bright feeling in front of your eyes,especially the glowing custom bracelets.The glowing wristband is add noctilucent powder to silica gel ,is the noctilucent powder let the silicone band can shine in the dark.However some guests told us their glowing wristband can’t shine in the dark .Don’t worry ,two conditions are required to let the glowing wristband light,the one is let the silicone bracelet absorbing ebough light ,the other one is put the silicone band in the dark.Only to meet these two conditions can you see the luminous effect of the rubber bracelet.And if you want to customize glowing wristband ,the band color just can be light color,such as 801 C,802 C, 803 C .etc .Otherwise the light can’t appeat out.About the glowing color ,we also have several to choose ,green ,blue ,red .etc .Each glowing color have different effect,the effect of green glowing color is the best,the next is blue glowing color then is the red glowing color.

Is it unimaginable?Whether you think it is so easy?Yes,it’s so simple to customize the rubber bracelet,do not go out of the door and get the band you want.

Detailed explanation of the size of the silicone wristband

Many guests who ordered the silicone band first time would want to have a detailed understanding of it in advance ,now we will make a detailed explanation of the size of the silicone bracelet for you.

What kind of size do the silicone band have?There are three parts for you to answer this question.First,about the band length ,we have three common size to choose.Adult size ( 8 inch : 202 mm ),it is suitable for adults to wear ;Youth size ( 7 inch : 180 mm ),it is suitable for teenagers to wear ;Toddler size ( 6 inch : 150 mm ),it is suitable for children to wear ,different length suitable for people of different ages.Then ,about the band width ,there are four general sizes for you to choose.1/4 inch ( 6 mm );1/2 inch ( 12 mm );3/4 inch ( 19 mm );1 inch ( 25 mm ).You can choose the size you need according to your preference.Third ,about the band thickness,the usual thickness of the silicone band is 2mm,sure , if you need the band with 1mm thickness or 2.5 mm thickness ,we can all customize it for you .Different thickness of silicone wristband have different texture.

How to choose the right band size?On the selection of the size of the silicone wristband ,you can choose the correct size you want according to two methods.The one method is according to the wearer age,people of different ages have their corresponding size.However use this method to select the size of a silicone bracelet has a certain error, because the wrists size of the people of the same age group are not the same,but this has little effect on the choice of the size of the silicone bracelet .The another method is you can use tape to measure the size of the wearer’s wrist,you can more accurately know what size of wristband do you need to customize ,a correct size of the silicone band will make the wearer feel more comfortable .

Is it possible to customize the special size of the silicone band?The answer is yes.If our existing size is too large or too small, you can also customize the size you want.In this case we can only trade under the line ,you can contact us to get a quotation and digital peoof via email ,telephone and chat online ,we will start the mass production after you confirm the proof.

Is the production time of the silicone band of different sizes the same? The production time of the silicone band is depends on the band width .The greater the width of the bracelet the production time is relatively long.For example, the production time of 500pcs 1/2 inch width silicone band is about half the production time of 500pcs 1 inch width silicone band.Same band style , same quantity ,the width of the silicone bracelet is small and the production time is shorter.

People of different ages are suitable for wearing different sizes of silicone band,come to us you can customize any size silicone wristband you want,our aim is let the customer satisfied to come and satisfied to back.

The production process of new rubber products is what?

Mold opening: all rubber products must be made into molds before they can be made into new products through molds.
The sample module is also called the hand module. When the customer confirms to cooperate with us and asks us to take samples, we first need the customer to provide samples or 2d or 3d drawings. If the customer provides a template, we will obtain a 3d map after taking the number of samples according to the template. If the customer provides a 3d drawing, then it is more convenient. our mold master will program mold opening according to the 3d drawing provided by the customer. It is usually to open a sample model to make the customer confirm, and then open a large model for production after the customer confirms that there is no problem.
The sample mold usually opens 1 to 2 holes. when the sample is needed, our sample mold will also open 4 holes. The sample module serves as a confirmation of the initial sample. it turns the drawing file into a physical object. Because of the elasticity of silica gel, the products produced do not necessarily match the drawings exactly. at this time, we only have to open a sample mold first and send out samples for the guests to confirm. If there is a problem with the sample mold, it is also relatively simple to modify the mold at this time. the modification time is short and the efficiency is high. Every time the mold is opened, the mold must be repaired through proofing to confirm the product, that is, to confirm the mold. When the product was developed to meet the requirements of the guests, the mold was confirmed.
Raw materials for sample molds:
Our company’s sample molds are all made of steel. The size of the template is determined according to the size of the product. Templates with length * width * height of 300 mm * 300 mm * 30 mm are usually used.
Production time of sample mold
The length of time for making the sample mold is determined by the structural complexity of the product. Generally, it takes about 2 – 3 days for simple products to be programmed and processed. The complexity is about 5 – 7 days. The more complex the product structure is, the longer it takes to open the mold.
Benefits of opening sample mold:
First of all, the sample mold has fewer holes, fewer templates and shorter processing time, thus the cost is relatively small and the efficiency is high. Secondly, opening the sample mold can also bring some other benefits. for example, even if the product structure is not confirmed for the first time, it is more convenient to modify the mold. after modification, the sample can be confirmed immediately, thus shortening the time. Thirdly, because the cost is low, opening the sample mold first can reduce the risk. If the large mold is directly opened, the sample cannot be confirmed again for the first time. when the modified mold is used to produce personalized silicone bracelets, there will be many quality problems. in this case, the mold will only be repaired more and more bad, and the repair will be more and more unfavorable to production. Therefore, opening a sample mold can achieve the goal of first confirming the product. once it is confirmed that there is no problem, the large mold can be opened at once. thus, the product produced has few quality problems.

Key process control instructions
1 ) color matching
Using precision electronic scales and other equipment, according to the color depth required by the product technology, measure the color master and coloring agent that match the production volume.
2 ) plastication
Explain the long chain molecules of raw rubber. the process of forming plasticity is called plastic chain. There are two methods of raw plastic chain: mechanical plastic chain and thermoplastic chain. Mechanical plastic chains make the degradation of long chain rubber molecules shorter and change from a high elastic state to a plastic state by the mechanical extrusion and friction of the plastic chain machine at a temperature not too high. Thermoplastic chains are made by introducing hot compressed air into raw rubber to shorten the degradation of long chain molecules under the action of heat and oxygen, thus obtaining plasticity. Plastic chain of raw rubber according to specific technical requirements
3 ) mixing
In order to adapt to different conditions of use and obtain different properties, as well as to improve the properties of rubber bracelets canada and reduce costs, different compounding must be added to the raw rubber. A process of mixing raw rubber and compounding agent after rapid mixing, placing them in a rubber mixing machine, and completely and uniformly dispersing the compounding agent in the raw rubber through mechanical mixing and cooperation. According to the specific performance required by the product in the production plan, add appropriate and appropriate amount of compounding agent to achieve the required purpose.
4 ) molding
In the production process of rubber products, various technological processes with different shapes and sizes are made in advance by using a calender or extruder, which is called molding. Calendering is suitable for making simple sheet and plate products. It is a method of rolling and forming a film with a certain shape and a certain size by mixing through a calender. Extrusion molding is a method of continuously molding rubber compound with certain plasticity through various die shapes ( also called templates ) under the extrusion of screws in the hopper of an extruder. Compression molding can also be used to manufacture some rubber products with complicated shapes ( such as leather cups and sealing rings ). with the help of the formed female and male molds, the rubber compound can be placed in the mold and heated for molding. According to the technical requirements in the production process, the silicone bracelets are  treated concretely.
5 ) vulcanization
The process of converting plastic rubber into elastic rubber is called vulcanization. a certain amount of vulcanizing agent ( such as sulfur, vulcanization accelerator, etc. ) is added to the semi-finished product made of raw rubber ( carried out in a vulcanizing tank ), heated and insulated at a specified temperature, so that linear molecules of the raw rubber are intersected and linked into a three-dimensional network structure through the formation of ” sulfur bridges”, thus making the plastic rubber compound into vulcanized rubber with high elasticity. Strictly control the vulcanization time and temperature according to the requirements of the production technology to achieve the required various indexes.

Why does the silicone bracelet appear grease after being placed for a period of time?

Silicone bracelets are very popular among young people. in some public welfare activities, we can also see the figure of silicone bracelets, as well as the concert of different stars. the signing ceremony will grow longer. In short, silicone bracelet is a product that appears more frequently in our life. Silicone bracelets are gorgeous in color and very fashionable. however, silicone bracelets appear grease after being placed for a period of time. why is this?
First, the quality of silica gel raw materials will make it difficult to remove edges of silica gel products. poor quality silica gel raw materials have insufficient toughness and tear strength. it is definitely difficult to remove edges in the process of removing edges.
Second, the forming of products in the forming process is relatively thick, so the burrs are actually relatively thick, and the increase in thickness will definitely lead to the difficulty of edge removal.
Third, the problems in the molding die, if the mold self-disassembly design is unreasonable, the molding die is used too long, the molding die is worn seriously, and the quality of the molding die is not too high, these situations will make it difficult to disassemble the edges after production and molding. Mold opening technology, a good mold can ensure 90 % of the quality of a product. the mold opening level of the factory must be excellent. otherwise, the product quality will not pass, and any good research and development results will be wasted. the production capacity of the factory will keep up with that. if one day you develop and sell the product very well, but you can’t produce it, you have to wait a month for a single one, then mosquitoes will all sleep, and you must think twice in this respect.
Fourth, environmental factors of vulcanization, the vulcanization temperature should be appropriate, and the problem of too high and too low will lead to difficult edge removal. at the same time, the vulcanization time should also be well controlled. if the vulcanization time is too long, the product will become brittle, and if the vulcanization time is too short, the vulcanization link will be ineffective. therefore, the vulcanization link must be well controlled. When we are looking for suppliers, we must first find the manufacturer. we also need to pay attention to some details when finding the manufacturer. The quality of silicone gift produced by many manufacturers varies, and the silicone gifts produced by adding blue aurora vulcanizing machine to the mold will be of better quality. Many factories use the traditional vulcanizing machine to heat up the plate of vulcanized silica gel, which will produce some inferior products. if the employees are responsible, they will help you trim the burrs. if they are not responsible, they will make do with it.
Silicone bracelets appear grease after spinning for a period of time, mainly because silicone bracelets are not handled properly during the production process. Silicone bracelet is a very durable ornament, otherwise it will not enter our life and appear on the wrists of those elderly people. In short, in order to ensure the quality of silicone bracelets, we must choose the manufacturers of silicone bands.